Loading the content... Loading depends on your connection speed!

pallet jack

pallet jack
Replcement truck jack noelift brand fd40 series 4t counter balanced diesel forklift for malaysia truck jack floor, ergonomic shelving storage racks at menards used bosch electric jack hammer.Power scraper hire best potential stocks factory direct supply whole sale international combustion 4ton diesel forklift, aluminum hand truck convertible mass hydraulic licence agricultural equipments counterbalanced electric forklift.

Bolted pallet rack home garbage and recycling bins garage storage racks las vegas, raymond trucking company h structural steel four wheels electric battery forklift for sale by owner roof racking.Crane pallet lifters glass metal shelf pallet forks kubota, concrete pump truck accident low lift pallet truck parts manual operators manual ce pallet jack 5500 lbs china manufacture reach truck forklift trucks1.0 1.5ton 1.6 4.0m full electric counterbalance pallet stacker.

pallet jack – The technical parameters of the forklift pallet jack are used to indicate the structural characteristics and performance of the forklift pallet jack. The main technical parameters are: from the rated weight, load center distance, the maximum lifting height, gantry inclination, the maximum speed, the minimum turning radius, the minimum ground clearance and wheelbase, track and so on.

1, rated lifting capacity: the rated weight of the forklift pallet jack truck is the weight of the cargo to the fork before the wall of the distance is not greater than the load center distance, the maximum weight of goods to allow lifting, in terms of T (tons). When the cargo center of gravity on the fork exceeds the specified load center distance, due to the vertical stability of the forklift pallet jack, the weight should be reduced accordingly.
2, the load center distance: the load center distance is placed on the fork on the standard goods, the center of gravity to the vertical section of the vertical section of the horizontal distance T, in mm (mm) said. For 1T to 4T forklift pallet jack specified load center distance of 500mm.
3, the maximum lifting height: the maximum lifting height refers to the flat on the ground, the forklift pallet jack full load, the goods rose to the highest position, the fork on the upper surface of the horizontal fork from the horizontal distance of the vertical distance.
4, Mast angle: Mast tilt refers to the forklift pallet jack on a flat solid ground, the mast relative to its vertical position forward or backward the maximum inclination. The role of the anteversion is to facilitate the removal and unloading of the goods; the role of the backlash is when the forklift pallet jack with cargo operation, the prevention of goods from the fork on the slide. General forklift pallet jack angle of 3 ¡ã ~ 6 ¡ã, rear tilt of 10 ¡ã ~ 12 ¡ã.
5, the maximum lifting speed: forklift pallet jack maximum speed is usually refers to the forklift pallet jack full load, the maximum speed of the goods to rise, in m / min (m / min) said. Improve the maximum lifting speed, can improve operational efficiency, but the lifting speed is too fast, prone to cargo damage and machine damage accident. At present, the maximum lifting speed of domestic forklift pallet jacks has increased to 20m / min.
6, the maximum speed: to improve the speed of the forklift pallet jack to improve the efficiency of operations have a great impact. For the internal combustion forklift pallet jack with a capacity of 1T, the maximum speed of full load is not less than 17m / min.
7, the minimum turning radius: When the forklift pallet jack in the no-load low speed, playing the steering wheel turn, the car’s outermost and the innermost to the turning center of the minimum distance, respectively, the minimum outside the turning radius Rmin and the minimum inside the radius of turning rmin The The smaller the smaller the radius of the outside corner, the smaller the floor area required for the forklift pallet jack, the better the mobility.
8, the minimum ground clearance: the minimum ground clearance is the wheel outside the body fixed on the lowest point to the ground distance, it means that the forklift pallet jack without a collision across the ground to highlight the ability of obstacles. The greater the distance from the ground clearance, the higher the passage of the forklift pallet jack.
9, wheelbase and track: forklift pallet jack wheelbase is the forklift pallet jack front and rear bridge center line horizontal distance. The track is the distance from the center of the left and right wheels on the same axis. Increase the wheelbase, is conducive to the vertical stability of the forklift pallet jack, but the body length increases, the minimum turning radius increases. Increased track speed is conducive to the lateral stability of the forklift pallet jack, but will increase the total width of the vehicle and the minimum turning radius.
10, the right angle of the minimum width of the channel: right angle channel minimum width refers to the forklift pallet jack for round-trip travel at right angles to the minimum width of the channel. Expressed in mm. Generally, the smaller the width of the right angle channel, the better the performance.
11, the minimum width of the stacking channel: the minimum width of the stacking channel is the fork in the normal operation, the minimum width of the channel.

Applicable scope
Industrial transport vehicles are widely used in ports, stations, airports, freight yard, factory workshops, warehouses, distribution centers and distribution centers, etc., in the cabin, cars and containers for pallet cargo handling, handling operations, the tray transport, container transport Indispensable equipment.
forklift pallet jack in the enterprise’s logistics system plays a very important role, is the main force in the material handling equipment. Widely used in stations, ports, airports, factories, warehouses and other sectors of the national economy. During the Second World War, the forklift pallet jack was developed. China began manufacturing forklift pallet jacks from the early 1950s. Especially with the rapid development of China’s economy, most of the enterprise material handling has been divorced from the original manual handling, replaced by forklift pallet jack-based mechanized handling. Therefore, in the past few years, China’s forklift pallet jack market demand every year to double-digit growth rate.
There are many brands of forklift pallet jacks available on the market, complex models, coupled with strong technology and very professional products, so the choice of models, supplier selection is a lot of buying companies often face problems. This article focuses on the selection of models, brand selection, performance evaluation criteria and China’s forklift pallet jack overseas market contribution rate and so on.
Operation certificate
Article 38 of the Regulations on Safety Supervision of Special Equipment: “Operators and their related management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeway, large amusement facilities and special motor vehicles in the plant (factory) shall, In accordance with the relevant provisions of the State by the special equipment safety supervision and management departments qualified, to obtain a unified national format of the special operating personnel certificate, before engaging in the corresponding operations or management.
Decision of the State Council on Establishing Administrative Licensing for Administrative Approval Projects That Need to Be Retained “(State Council Decree No. 412) Catalog No. 249: Design, Installation, Use, Inspection Unit and Personnel Qualification of Pressure Pipeline.

Basic conditions
1, engaged in forklift pallet jack truck special equipment operating personnel card examination to be in the age of 18 years of age;
2, physical health and to meet the application of the forklift pallet jack engaged in the type of physical requirements of the body;
3, with the application for forklift pallet jack license special equipment to adapt to the types of education;
4, with the application for forklift pallet jack card special equipment to adapt to the types of work experience;
5, with a forklift pallet jack truck special equipment operators corresponding safety technology knowledge and skills;
6, in line with forklift pallet jack special equipment operating personnel safety technical requirements of the other requirements.
The specific conditions shall be in accordance with the relevant safety technical specifications. Application for “special equipment operating personnel card” of the staff, should first of all to the special equipment operating personnel examination institutions to participate in the examination, and pass the examination issued special equipment operating personnel certificate.

Terminology
1. Rated weight: refers to the fork on the goods on the center of gravity in the specified load center distance, the forklift pallet jack should be able to lift the maximum weight. (In kg)
2. Load center distance: refers to the cargo center of gravity to the vertical section of the fork front section of the specified distance.
State regulations: Q (on behalf of the load) <1t when the 400mm; 1 ¡Ü Q <5 when the 500mm;
5 ¡Ü Q ¡Ü 10 when the 600mm; 12 ¡Ü Q ¡Ü 18 when the 900mm; 20 ¡Ü Q ¡Ü 42 when the 1250mm.
3. Maximum lifting height: refers to the forklift pallet jack is located in a horizontal solid ground, mast placed vertically and bear the weight of goods from the rated, the fork can rise the maximum height of the fork on the plane to the vertical distance to the ground.
4. Free lifting height: refers to the height of the mast in the same circumstances, the fork can be the maximum height from the ground.
5. Minimum turning radius: refers to the forklift pallet jack wheel steering wheel to the limit position, and the lowest steady speed to do the turning movement, the instantaneous center of the car from the outermost distance.
6. Mast angle: refers to the no-load forklift pallet jack mast from its vertical position forward or backward tilt the maximum angle of swing.
7. Wheelbase: the vertical distance from the center of the front axle to the center of the rear axle.

Classification of vehicles
forklift pallet jacks can usually be divided into three categories: internal combustion forklift pallet jacks, electric forklift pallet jacks and storage forklift pallet jacks.

Internal combustion
Internal combustion forklift pallet jacks are divided into ordinary internal combustion forklift pallet jacks, heavy forklift pallet jacks, container forklift pallet jacks and side forklift pallet jacks.
¢Ù ordinary internal combustion forklift pallet jack
General use of diesel, petrol, liquefied petroleum gas or natural gas engine as a driving force, the load capacity of 1.2 to 8.0 tons, the operating channel width is generally 3.5 to 5.0 meters, taking into account the exhaust emissions and noise problems, usually used in outdoor, workshop or other Emissions and no special requirements of the place. Because fuel is easy to add, it can achieve long continuous operation, and can work in harsh environments (such as rain) work.
¢Ú heavy forklift pallet jack
Using diesel engine as a driving force, carrying capacity of 10.0 to 52.0 tons, generally used for heavy cargo terminals, steel and other industries outdoor operations.
¢Û container forklift pallet jack
Using diesel engine as a driving force, carrying capacity of 8.0 ~ 45.0 tons, generally divided into empty stacker machine, heavy box stacker and container front hanging. Used in container handling, such as container yard or port terminal operations.
¢Ü side forklift pallet jack
Using diesel engine as a driving force, carrying capacity of 3.0 to 6.0 tons. In the case of no turning, with the ability to fork directly from the side of the goods, so mainly used to fork the long type of goods, such as wood, steel and so on.

electric
To the motor as the driving force, the battery is energy. Carrying capacity of 1.0 to 8.0 tons, the working channel width is generally 3.5 to 5.0 meters. Because there is no pollution, noise is small, it is widely used in indoor operations and other environmental requirements of higher conditions, such as medicine, food and other industries. With the emphasis on environmental protection, electric forklift pallet jack is gradually replacing the internal combustion forklift pallet jack. Since each group of batteries is generally required to be charged after about 8 hours of operation, spare batteries are required for multi-shift operating conditions.

Warehousing
Warehousing forklift pallet jack is mainly for the warehouse cargo handling and design of the forklift pallet jack. In addition to a small number of storage forklift pallet jacks (such as manual pallet trucks) are man-driven, the other is driven by the motor, because of its compact, flexible mobile, light weight and good environmental performance in the storage industry has been widely used. In the multi-class operation, the motor-driven storage forklift pallet jack need to have spare batteries.

Van
Carrying capacity of 1.6 to 3.0 tons, the working channel width is generally 2.3 to 2.8 meters, fork lift height is generally about 210mm, mainly for the level of storage and cargo handling. There are three types of operation, such as walking, standing and driving, and can be selected according to efficiency requirements.

Stacking carts
Electric pallet stacking car is divided into all-electric tray stacker and semi-electric pallet truck two types, as the name suggests, the former for the driving, lifting are electric control, more effort. While the latter is the need for manual manual pull or push the forklift pallet jack to walk, lift is electric.
Carrying capacity of 1.0 to 2.5 tons, the operating channel width is generally 2.3 to 2.8 meters in the structure than the electric pallet truck forklift pallet jack more mast, fork lift height generally 4.8 meters, mainly for the warehouse of goods stacking and Loading and unloading.

Forward car
Carrying capacity of 1.0 to 2.5 tons, the mast can move forward or retract, retraction when the operating channel width is generally 2.7 to 3.2 meters, lifting height up to 11 meters or so, commonly used in the middle of the warehouse stacking height, Cargo operations.

Electric picking
In some cases (such as supermarket distribution center), do not need the entire pallet shipments, but in accordance with the order to select a variety of goods to form a tray, this part is called sorting. In accordance with the height of the selected goods, electric picking forklift pallet jack can be divided into low selection forklift pallet jack (2.5 meters) and high and medium picking forklift pallet jack (up to 10 meters).
Carrying capacity of 2.0 to 2.5 tons (low), 1.0 to 1.2 tons (in the high, with the cab to enhance).

Low driving three-way stacking forklift pallet jack
Usually equipped with a three-way stacking head, forklift pallet jacks do not need to turn, fork can be rotated on both sides of the goods can be stacked and pick up, channel width of 1.5 to 2.0 meters, lifting height of up to 12 meters. forklift pallet jack cab can always be on the ground can not be improved, taking into account the operating field of vision restrictions, mainly used to enhance the height of less than 6 meters.
High driving three-way stacking forklift pallet jack
Similar to the three-way stacking forklift pallet jack, the three-way pallet truck is also equipped with a three-way stacking head with a channel width of 1.5 to 2.0 meters and a lifting height of 14.5 meters. The cab can be raised, the driver can clearly observe any height of the goods, you can also picking operations. The three-way stacker forklift pallet jack is superior to the low-powered three-way pallet truck in terms of efficiency and performance, so the model has gradually replaced the low-powered three-way pallet truck.

Electric tractor
Electric tractor
Tractor using motor drive, the use of its traction capacity (3.0 to 25 tons), behind the pull of several goods loaded car. The main categories are: airport logistics electric tractor, workshop electric tractor, small electric tractor, electric three-wheel tractor, often used in the workshop or between the large number of goods transport, such as automobile manufacturing warehouse to the assembly line transport , The airport’s luggage transport.
Models and configurations
Models and configuration options generally from the following aspects:

pallet jackforkliftpallet truckforklift low maintence electric forklift truck 1.0 1.5ton material handling